Endure hurricane force winds with Dura-Storm™ Doors. The Hurricane Series is customized to meet the most stringent building design & code requirements, reducing air infiltration, withstanding high structural pressure and maximizing forced entry resistance. The Dura-Storm™ Hurricane Series can lower the cost of ownership by reducing the need for costly repairs caused from damaging winds. Areas that experience high winds but lack a hurricane specific code can benefit by improving building integrity. The Dura-Storm™ Hurricane Automatic Door Systems have been tested to meet Dade County Florida’s code requirement for building structures withstanding hurricane forces.

Endures High Structural Pressure

• All welded panel design.
• Wind resistant dampers.
• Reinforced top and bottom pivots.
• Top and bottom panel ball detents.
• Foam insulated panels.
• Reduced air infiltration.
• Full breakout series.
• Single slide or bipart.
• Impact rated versions available.

Enhanced Safety & Security

• Multi point flush bolt security.
• Reinforced security hooks.
• Armored Strike.
• Lock/unlock indicators. For user convenience.
• Full Panel Breakout Series Available.
• Impact glass.
• Dade County approved.

DOOR PACKAGE, TYPE, MAX. DIMENSIONS H x W, PSF RATING

2000/3000 Dura-Glide Series
Narrow Stiles: +45.9 PSF
Bipart: 7’ 8” x 14’ 0”

3000 Dura-Storm Impact Series
Medium Stiles: +56 PSF
Bipart: 7’ 8” x 14’ 0”
Single Slide: 7’ 8” x 8’ 0”

3000 Dura-Storm Impact Series
Medium Stiles - Steel Reinforced: +50 PSF
Bipart: 8’ 8” x 16’ 0”
Single Slide: 8’ 8” x 9’ 0”

2000 Dura-Storm Impact Series
Medium Stiles, Impact Glass: +56 PSF
Bipart: 7’ 8” x 14’ 0”
Single Slide : 7’ 8” x 8’ 0”

2000 Dura-Storm Impact Series
Medium Stiles - Steel Reinforced, Impact Glass: +50 PSF
Bipart: 8’ 8” x 16’ 0”
Single Side : 8’ 8” x 9’ 0”

2000 Dura-Storm Impact Series
Medium Stiles - Steel Reinforced, Impact Glass: +43.3 PSF
Bipart :10’ 8” x 15’ 11 1/2”

Specifications:

• HEADER SIZE: 8” (203mm) high x 6” (152mm) deep
• MAXIMUM SIZES: Single Slide— 9’ (2.74m) wide x 8’8” (2.66m) high; Bipart— 16’ (4.88m) wide x 8’8” (2.64m) high
• MINIMUM SIZES: Single Slide— 7’6” (2.29m) wide x 7’8” (2.34m) high; Bipart— 10’ (3.05m) wide x 7’8” (2.34m) high
• TYPICAL DOOR PANEL WEIGHT: up to 220 pounds each (100kg)
• DRIVE SYSTEM: one 1/4 HP DC motor standard; option for two 1/4 HP DC motors
• CONTROLLER: microprocessor based, safety logic, watchdog LED
• SENSORS: Two Stanley SU-100 motion sensors one Stanley Stan-Guard presence sensor and doorway holding beams, Stan-Vision optional.
• BREAKOUT: SX and SO panels on the 3000, SX panels on the 2000
• POWER REQUIRED: 120 VAC, 5 amps min.
• CODE COMPLIANCE: ANSI A156.10, NFPA 101, UL, cUL, ICBO, BOCA, South Florida Building Code, Dade County Compliance, ASTM.